054 TESTING SLIC3R SETTINGS

Testing Slic3r 1.2.9.  with 1.75mm black ABS filament. 5.0mm nozzle at 215 c. Using default settings with these changes: 15% Infill. Travel speed 50mm/s and Cooling at 15s. Aborted because Support settings were activated.

Print time: [00:07:00]   Total Service Hours: [38:35:44]

 053 TESTING CURA SETTINGS

Same as test [052]. Made these additional changes: Changed temp to 210 c. from 215 c. Changed shell thickness from 1.2mm to 1.5mm. Changed Flow from 100% to 95%. Changed Infill from 20% to 15% and disabled Comb. No good.

Print time: [00:25:51]   Total Service Hours: [38:35:37]

 052 TESTING CURA RETRACTION SETTINGS

Testing Cura 15.04.2 with 1.75mm black ABS filament. 5.0mm nozzle at 215 c. Using default settings with these changes: Retraction Speed from 40.0 to 12.0 and Retraction Distance from 4.5 to 1.2.

Print time: [00:21:08]   Total Service Hours: [38:09:46]

 051 TESTING SKEINFORGE SLICER

Testing Skeinforge41 uploaded by romscraj on GitHub.  Using the Durbie Normal profile. Changed filament to 175mm black ABS at 220 c. OK print with just typical hang of filament from non-support structure.

Print time: [00:29:59]   Total Service Hours: [37:48:38]

 050 TESTING CURA SLICER

Testing Cura 15.04.2 with 1.75mm orange ABS filament. Temperature at 220 c. Default settings with these changes: Travel speed changed from 100mm to 50mm/s. Shell thickness set at 1.2mm. Abort!

Print time: [00:10:00]   Total Service Hours: [37:18:39]

 049 TESTING CURA SLICER

Testing Cura 15.04.2 with 1.75mm orange ABS filament. Same as test [048]. Changed back Flow from 95% to 100%. Aborted.

Print time: [00:10:00]   Total Service Hours: [37:08:39]

 048 TESTING CURA SLICER

Testing Cura 15.04.2 with 1.75mm orange ABS filament. 5.omm nozzle at 215 c. Using default settings with these changes: Change speed from 50.0 to 32.0 Changed shell thickness from 1.2 to 1.5. Channged filament flow from 100% to 95%.. Test failed.

Print time: [00:15:00]   Total Service Hours: [36:58:39]