Keeping Mininum Layer Time (sec) from 5.0 to 20.0 and changed Minimum cooling Speed (mm/s) from 10.0 to 5.0.
Print time: [00:019:54] Total Service Hours: [40:31:59]
060 TESTING CURA SLICER
Same as test [059]. Changed Mininum Layer Time (sec) from 5.0 to 20.0.
Print time: [00:018:59] Total Service Hours: [40:12:05]
059 TESTING CURA SLICER
Testing Cura 15.04.2 with 1.75mm black ABS filament. 5.omm nozzle at 220 c. Using default settings with no changes. Needs cooling.
Print time: [00:012:15] Total Service Hours: [39:53:06]
058 TESTING SKEINFORGE SETTINGS
Testing Skeinforge with Durbie profile Filament is 175mm black ABS at 220 c. Test is to compare difference against test [057] Slic3r profile to verify a non-hardware issue. printed OK. Hardware appears fine.
Print time: [00:029:35] Total Service Hours: [39:40:51]
057 TESTING SLIC3R SETTINGS
Testing Slic3r 1.2.9. with 1.75mm black ABS filament. 5.0mm nozzle at 220 c. Using default settings with these changes: Changed Cool slowdown from 5.0 to 15.0. Abort. Not enough filament extruding for pillars.
Print time: [00:007:00] Total Service Hours: [39:11:16]
056 TESTING SLIC3R RETRACTION
Testing Slic3r 1.2.9. with 1.75mm black ABS filament. 5.0mm nozzle at 215 c. Using default settings with these changes: Retraction Length from 2.0 to 1.2 and Retraction Speed from 40.0 to 12.0. No good.
Print time: [00:022:32] Total Service Hours: [39:04:16]
055 TESTING SLIC3R SETTINGS
Testing Slic3r 1.2.9. with 1.75mm black ABS filament. 5.0mm nozzle at 215 c. Using default settings with these changes: 15% Infill. Travel speed 50mm/s and Cooling at 15s. Aborted. Possible retraction problem?
Print time: [00:06:00] Total Service Hours: [38:41:44]
