068 TESTING TEMPERATURE

175mm white ABS filament. Sliced with Skeinforge default settings. Print temperature 230 degrees c.

Print time: [00:07:57]   Total Service Hours: [41:55:51]

 067 TESTING TEMPERATURE

175mm white ABS filament. Sliced with Skeinforge default settings. Print temperature 220 degrees c.

Print time: [00:07:57]   Total Service Hours: [41:47:54]

 066 TESTING TEMPERATURE

175mm white ABS filament. Sliced with Skeinforge default settings. Print temperature 210 degrees c.

Print time: [00:07:57]   Total Service Hours: [41:39:57]

 065 TESTING TEMPERATURE

175mm white ABS filament. Sliced with Skeinforge default settings. Print temperature 200 degrees c.

Print time: [00:07:57]   Total Service Hours: [41:32:00]

 064 TESTING SLIC3R SLICER

Testing Slic3r 1.2.9.  with 1.75mm black ABS filament. 5.0mm nozzle at 215 c. Using default settings with these changes:  Cooling Slowdown if print time is below from 5.0 mm/s to 20 mm/s. Changed Minimum Print speed from 10 mm/s to 5 mm/s.

Print time: [00:022:10]   Total Service Hours: [41:24:03]

 063 TESTING CURA SLICER

Using same profile as Cura test [063] with a temperature of 220 c. Testing  temple calibration model with these settings. Abort.

Print time: [00:010:00]   Total Service Hours: [41:01:53]

 062 TESTING CURA SLICER

Same as test [061]. Changed temperature from 220 c. to 210 c.

Print time: [00:019:54]   Total Service Hours: [40:51:53]