038 TESTING SKEINFORGE SPEED SETTINGS

20mm calibration cube. Feed Rate (mm/s) and Flow Rate Setting (float) 64.0. Changed back to default Cooling Minimum Layer Time (secs.) 15.0 from 5.0. Temp 220 c. Perimeter Feed Rate over Operating Feed Rate (ratio) and the Perimeter Flow Rate over Operating Flow Rate (ratio)  0.4. Default profile speed is 16:08. Makes a saving of 52 seconds for this profile on this scale of model.

Print time: [00:15:12]   Total Service Hours: [31:08:55]