101 TESTING SLIC3R PROFILE

Testing organic print at 100mm height. 3mm Orange ABS filament. Sliced with Slic3r  1.2.9 using as close approximation to Skeinforge default settings (Durbie Normal) with these changes: Filament Dimension set to 0.9. Cooling set to Minimum Cooling Speed 2.0 sec. retraction values are set at Slic3r default. Infill is changed to Line pattern. Checked Infill Only Where Needed. Changed support values to: Z distance from 0.2 to 0.3mm. Pattern Spacing from 2.5 to 5.0mm. Interface Pattern Spacing from 0.0 to 3.0 mm. Model has delaminating layers. Odd layer count noticed. Aberration of slicer in general.

Print time: [12:20:41]   Total Service Hours: [69:53:00]